English

Bit ɗin tricone na API & ISO IADC537 26″(660.4mm)

Hoton API & ISO tricone roller IADC537 26″(660.4mm) Fitaccen Hoto
  • Bit ɗin tricone na API & ISO IADC537 26″(660.4mm)
  • Bit ɗin tricone na API & ISO IADC537 26″(660.4mm)
  • Bit ɗin tricone na API & ISO IADC537 26″(660.4mm)

Sunan Alamar:

Gabas Mai Nisa

Takaddun shaida:

API & ISO

Lambar Samfura:

IADC537G

Mafi ƙarancin adadin oda:

Guda 1

Cikakkun Bayanan Kunshin:

Akwatin Plywood

Lokacin Isarwa:

Kwanakin aiki 5-8

Riba:

Babban Aiki Mai Sauri

Lokacin Garanti:

Shekaru 3-5

Aikace-aikace:

Mai, Iskar Gas, Man Fetur na Geotherm, Hako rijiyoyin ruwa, HDD, Haƙar ma'adinai

Cikakken Bayani game da Samfurin

Bidiyo Mai Alaƙa

Kasida

IADC417 12.25mm tricone bit

Bayanin Samfurin

Mai samar da injin haƙa dutse

An sayar da injin haƙa ramin API TCI daga masana'antar China
Bayanin Bit:
IADC: 537 - An yi amfani da TCI a matsayin na'urar ɗaukar bearings mai kariya daga ƙuraje masu laushi zuwa matsakaici masu rauni da kuma ƙarancin ƙarfin matsi.
Ƙarfin Matsi:
85 - 100 MPA
12,000 - 14,500 PSI
Bayanin Ƙasa:
Duwatsu masu tauri da kuma masu tsagewa kamar: duwatsu masu tsini na quartz, duwatsu masu tauri ko alli, hematite. Duwatsu masu tauri da kuma masu tsagewa, kamar duwatsu masu tsini na quartz, dolomites, quartzite shales, duwatsu masu kauri da kuma masu kama da juna.
Za mu iya bayar da ragowar TCI a cikin girma dabam-dabam (daga 3 3/8" zuwa 26") da duk mafi yawan lambobin IADC.

Dangane da kayan yankewa, ana iya raba tirocne bit zuwa TCI bit da Steel Tooth Bit.
TCI a takaice tana nufin Tungsten Carbide Insert, tungsten carbide abu ne mai tauri a fannin haƙa dutse, wani abu kuma shine lu'u-lu'u.
Abubuwan da aka saka suna nufin haƙoran Tungsten Carbide waɗanda suka dace da mazugi na bits na mazugi mai juyawa. Bit ɗin haƙoran API TCI tricone. Haɗin zaren API na IADC537 26" shine fil 7 5/8 na reg. Don girman bit ɗin tricone 26", muna kuma kiran bit ɗin tricone 660mm.

Ragowarmu suna da nau'in bearing na roba/Elastomer da kuma bearing na ƙarfe. Muna ba da shawarar cewa ya fi kyau mu zaɓi biredi masu rufe fuska na ƙarfe don rijiyoyin dutse masu zurfi tare da siffofi masu tauri. Don haƙa rijiyoyi masu zurfi sosai, muna ba da shawarar biredi masu rufe fuska na ƙarfe waɗanda suka wuce mita 1000. Don haƙa rami mai tauri da dogon nesa wanda ba shi da rami wanda tsawonsa ya wuce mita 300, muna kuma ba da shawarar biredi masu rufe fuska na ƙarfe waɗanda aka rufe fuska da ƙarfe. Don haƙa rijiyoyin ruwa, haƙa rami mai zurfi ko ayyukan haƙa rami mai zurfi wanda ba shi da rami, biredi masu rufe fuska na roba (roba) suna da kyakkyawan aiki mai kyau.

IADC417 12.25mm tricone bit

Bayanin Samfuri

Bayanin Asali

Girman Dutsen Bit

inci 26

660mm

Nau'in Bit

TCI Tricone Bit

Haɗin Zaren

Lambar Rajistar API 7 5/8

Lambar IADC

IADC 537G

Nau'in ɗabi'a

Mujallar da aka rufe da murfin bearing tare da Kariyar Gauge

Hatimin ɗaurin

Elastomer ko Roba/ Karfe

Kariyar Diddige

Akwai

Kariyar Tayal

Akwai

Nau'in Zagayawa

Zagayen Laka

Yanayin haƙa

Hako mai juyawa, hako mai zafi, hako mai zurfi, hako mai injin

bututun ƙarfe

Bututun Hannu Uku

Sigogi na Aiki

WOB (Nauyi akan Bit)

66,736-148,302 lbs

297-660KN

RPM(r/min)

50~220

Tsarin aiki

Tsarin matsakaici mai ƙarancin ƙarfi, kamar matsakaici, laushi mai laushi, farar ƙasa mai laushi, farar ƙasa mai laushi matsakaici, farar ƙasa mai laushi matsakaici, farar ƙasa mai laushi matsakaici, farar ƙasa mai ƙarfi matsakaici, farar ƙasa mai ƙarfi mai ƙarfi da kuma tsatsa, da sauransu.

IADC537 yana nufin cewa tricone roller bit ya dace da haƙa duwatsu masu tauri kamar dutse mai laushi, shale, gypsum, da sauransu. An rufe bearing ɗin don ƙara tsawon rayuwar aiki.
Abubuwan da aka saka na Tungsten carbide (TCI) suna da ƙarfi sosai wajen haƙa duwatsu masu tauri, diddigen mazugi da hannuwa suna cike da haƙoran Tungsten Carbide.
Girman da aka saba gani a fannin haƙar ma'adinai, don haƙa ramin fashewa. A fannin haƙar ma'adinai, lambar farko ta lambar IADC yawanci 6, 7, 8 ne, kuma lamba ta uku yawanci 2 da 5 ne.
A cewar ƙayyadaddun bayanai na IADC don tricone bit, "2" yana nufin daidaitaccen buɗaɗɗen na'urar juyawa ta bearing, kuma "5" yana nufin buɗaɗɗen na'urar juyawa mai kariyar ma'auni.

tebur

Far Eastern masana'antu ne na musamman a fannin haƙa rami, kamar tricone bits, PDC bits, HDD hole opener, da kuma truller na tushe don aikace-aikace daban-daban.
A matsayinmu na babbar masana'antar haƙa rami a China, burinmu shine ƙara tsawon rayuwar haƙa ramin. Kullum muna ƙoƙarin inganta bits ɗin da ke da yawan shiga. Manufarmu ita ce mu sayar da inganci mai kyau tare da mafi ƙarancin farashi.

hoto
hoto
ƙarfe mai hatimin tricone
hoto
IADC417 12.25mm tricone bit

tambayoyin da ake yawan yi akai-akai

T: Me yasa za mu zaɓi kanmu maimakon sauran masu samar da kayayyaki?
A: Za mu iya tabbatar da ingancin iri ɗaya a mafi ƙarancin farashi kuma mu tabbatar muku da amincin kuɗin ku, isar da kaya akan lokaci, mafi kyawun sabis, shawarwari na ƙwararru, da sauransu.

T: Ta yaya za ku tabbatar da ingancin kayayyakinku?
A: Mun kuduri aniyar tabbatar da inganci a dukkan fannoni na kasuwancinmu - mutanenmu, hanyoyinmu da kayayyakinmu.

T: Shin kai mai masana'anta ne ko kuma kamfanin ciniki?
A: Mu kamfani ne da ya ƙware a bincike da samar da bits na gouge, musamman bits ɗin tee, bits ɗin PDC, maɓallan buɗe HDD, hobs ɗin tushe da kayan aikin da suka shafi hakan.

T: Shin ana duba inganci bayan an gama aikin?
A: Muna da wani taron bita mai zaman kansa na duba samfura don tabbatar da cewa duk samfuran sun wuce cikakken bincike 100% kafin a aika su ga abokan ciniki.

  • Na baya:
  • Na gaba:
    • pdf

    Nau'ikan samfura